For tow bar lighting for your 1991 Mazda B2600i you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV. view full answer...
We do have everything you need to install a trailer brake controller on your 2003 Mazda B3000, however this truck does not feature a factory brake controller port.
Starting with the brake controller itself, I highly recommend the Tekonsha Prodigy P3 # 90195. This is an excellent, proportional controller that will activate the trailer brakes at the same time and with the same intensity that you apply to them in your truck. It features an easy to read digital display and continuous diagnostics... view full answer...
The roof rack I recommend for your 1994 Mazda B4000 is the SeaSucker Monkey Bars Roof Rack # 298-SX6000B. This roof rack attaches to the roof of your vehicle via powerful vacuum cups and can be installed at any point on your roof to help out with your kayak.
One of the best things about this roof rack system is it's versatility. Since it uses vacuum cups instead of the traditional clamps it can easily be moved from one vehicle to another if the need ever arises.
Attached is a review video... view full answer...
You will need to start with a 4-way (if you do not have one). For that you would want the # 118325.
From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product as well. view full answer...
I recommend using the Curt TriFlex Brake Controller # C24VV with the Pigtail # C51515 for your 2000 Mazda B Series Pickup. I like this brake controller because it is a cost-effective proportional controller that comes with a limited lifetime warranty. You could possibly have some sort of OEM wiring under your driver's side dash if your pickup came with the factory tow package but I'm not entirely sure. If you can't find any wiring then we need to add some so you can control the brakes on... view full answer...
The Roadmaster XL Base Plates, # 483-1, are the correct base plates for a 2001 Mazda B Series truck. You will need a tow bar that is compatible with XL style base plates. There are several different models available and I have included a link to them for you to view.
I recommend the RoadMaster Tracker Tow Bar, # RM-020, as an economical option. In order to make the XL arms removable, you will also need Quick Disconnects, # RM-201, when using this tow bar. I have included a link to the... view full answer...
First you'd need the base plate kit part # 483-1 which is a confirmed fit for your 2000 Mazda B Series truck and attaches to the truck frame to provide the attachment point for the tow bar.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon 2, # RM-520. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the... view full answer...
The correct hitch for your 1987 B Series Mazda truck is the Curt Hitch part # C12303 that you referenced.
For trailer wiring you would need the part # 119178KIT.
The ball mount you would need is part # C45521, 2 inch hitch ball # A-82, 1-7/8 inch hitch ball # A-80. view full answer...
Because LED running lights use much less power than their incandescent counterparts, you should not be in any danger of overloading anything. Because of that, and because your truck already has the 4 pole connector, you do not need a converter. Your signal is already converted. You can certainly use a 4 to 6 pole adapter, part # 37175 or a 4 to 7 pole adapter, part # 37185. The powered accessory lead would use the black wire on the 7 way adapter and the blue wire on the 6 way. You would... view full answer...
The hitches we carry for the 1996 Mazda B3000 like the Curt # 13138 fit models from 1994 to 2010 so yes a hitch from a 2001 would also fit a 1996 model. view full answer...
Because trailer tail light systems combine the stop lamp and turn signals for each side onto a single circuit, you will need to use a vehicle-to-vehicle tail light converter, part # 118158 to split the brake light circuit back out.
The white wire on the input side of the converter would ground to the trailer frame, the green input wire would tap into the right turn circuit on the trailer and the yellow input wire would tap into the left turn circuit. The output side of the converter also... view full answer...
The hitch that is on your 2007 Honda Accord is not compatible with your 1998 Mazda B Series Pickup. You would need to get a hitch that is custom fit for your Mazda truck. For that I would recommend the Curt Trailer Hitch # 13138. Check out the install video I attached for this hitch as well.
For trailer wiring I would recommend the Tow Ready Harness # 118325.
For ball mounts I recommend the etrailer Ball Mount Kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip,... view full answer...
We do!
I recommend checking out the Rampage SuperBrite LED Tailgate Light Bar # RA960135 for your 2008 Mazda B4000 4x4 pickup. This carries the basic stop, turn, tail lighting and is powered by your 4-Way flat connector. If you don't already have a 4-Way flat on your Mazda you'll also need the T-One Wiring # 118325 which tees into your OEM wiring connector and runs the wiring through a converter to protect the factory wiring on your vehicle.
Attached are some videos for you to check out. view full answer...
We have a Westin Fey bumper that does fit your 1987 1987 Mazda B2000 that comes with the correct hardware but the # 66000 would not be what you'd need. Instead you'd want the part # 65000-95800. view full answer...
Clearance for your spare tire on your 1997 Mazda B2300 may be an issue. Both Curt hitches Item # 13019 and Item # 13138 are designed to not interfere with a full size spare tire. Several customers have commented that Curt Hitch Item # 13138 fits with the spare without any challenges so I would go with this one.
I also recommend the Etrailer Ball Mount Kit, Item # 989900, that comes with 2 ball mounts, 2 balls (1-7/8 inch and 2 inch), 2 pin and clips, and a storage bag. I also recommend... view full answer...
The Bauer Products Camper Door Lock # BA54FR would work as a replacement for what you have now. It's the exact size you are needing. view full answer...
I recommend using the Universal Installation Kit for Trailer Brake Controller # ETBC7. It provides you will all the wiring and circuit breakers needed to install the charge line and a brake controller on your 1991 Mazda B2600i. I have linked a video below that will help guide you through the installation process for this kit.
The Tekonsha Prodigy P3 Trailer Brake Controller # 90195 is an easy to use proportional brake controller. It will automatically adjust brake pressure for light or... view full answer...
For your 1998 Mazda B2500 6 foot bed the correct Bestop Supertop is the part # B76302.
The part # B76304 that you referenced isn't a fit for your truck so I can't recommend it for you. view full answer...
Tie-down anchors for truck bed stake pockets like the Erickson Retractable Tie-Down Anchors # EM01003 referenced in your question are designed to fit most truck bed stake pockets. I have attached an image showing the dimensions of this product so you can check to ensure these will work with your 1999 Mazda B Series Pickup. It has a length of 3-3/8 inches and a width of 2-3/16 inches. These have a weight capacity of 1,000 pounds.
Another option to look at if the Erickson Anchors do not... view full answer...
Go To Results